Microcom 428TM Manual del operador Pagina 197

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 243
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 196
Chapter 10 Printer Maintenance
428TM Operator’s Manual - 880042-0141 10-3
4. Re-latch the printhead assembly, hold the printer, and slowly pull the cleaning card
(you will feel resistance) out of the printer.
Figure 10-3 Remove the Cleaning Card
5. Reinstall the media and check print quality.
6. Repeat cleaning steps if necessary.
Thermal cleaning cards should not be used more than three times each. Extremely dirty
cards should be disposed of immediately.
10.3 Internal Cleaning
The overall internal cleaning of the printer is important to help reduce the dust and other
contaminates residing in the printer that may attach to the print head or drive roller and
affect the printer’s performance.
1. Remove any installed media.
2. Turn the printer power “OFF.”
3. Release the printhead assembly and rotate to the open position.
4. The exposed Drive Roller, Printhead, and Paper Path may be cleaned using a cotton
swab or lint-free wiping rag dampened with isopropyl alcohol.
Vista de pagina 196
1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 242 243

Comentarios a estos manuales

Sin comentarios